More flex inputs

[kevin1]

Not in the near term… Read this other thread:

Roving Flex Sensors and Device Detection

I don’t believe this is the intent of the Dedicated Circuit Monitoring. The idea is that you are using them on a circuit breaker that only has 1 device on it. So a 220v water heater, 120v septic pump, dishwasher. etc… If you are monitoring a circuit that has multiple devices on it, you will just get one bubble for everything on that circuit. If you are familiar with the Smart p;ug integration, think of this like that, but with clamps in the panel vs plugs at your outlets. If you use a smart p…