We can configure the threshold (level, time) between standby and ON, but we cannot do the same for the transition between standby and OFF. Many modern devices have a standby power that is close to zero so the distinction between off and standby is tricky. For example my TV is typically well below 1W (as reported by Kasa plug), but occasionally might go a hair above that. Unfortunately, this causes constant log entries when the TV is always on standby. Here’s todays:
I understand that part of the problem is that Sense seems to drop fractional digits. Kasa can tell the difference an reports the average standby power as somewhere in the range of 0.3-0.6W, which is clearly different from off, which is a true 0W. So why can’t Sense also read the fractional digits to distinguish between Off and standby, even though it only displays integers. This would quiet the logs quite a bit.
Another option would be to allow configuring the off/standby thresholds. Is this case I would set the threshold to 0W, meaning that 0W is still considered standby. Would be more realistic.